Wheelchair lift the rack bezel

20. May 2013 · Write a comment · Categories: Uncategorized · Tags:

Wheelchair lift the rack bezel

wheelchair-lift

To avoid wheelchair lifts running or hanging cage fall, gear and rack safety device occlusal separation the wheelchair lift rack back wheel and rack baffle should be used. When the rack rear wheel failure, rack bezel become the ultimate protective device.

Wrong phase-phase protection
The circuit has a phase sequence and phase failure protection. The circuit wrong phase or phase failure protection will be able to cut off the power to the motor control circuit in a timely manner, the car will not start.

Aluminum lift platform

17. May 2013 · Write a comment · Categories: Uncategorized

Aluminum lift is made of high strength quality aluminum alloy material, has a beautiful shape, small size, light weight, flexible operation, easy to implement. Lift stable, safe and reliable. Its light appearance, maximum lifting capacity in a very small space. Widely used in factories, hotels, restaurants, railway stations, theaters, exhibition halls and other places, the maintenance of equipment, paint, decoration, replacement lamps, electrical appliances, cleaning and maintenance purposes the best security partner.

Single mast aluminum lift: This series of products for indoor hall is widely used in star hotels, supermarkets and other industries, the high-altitude operations within the plant, with a lift balance, easy to operate, can enter the foyer, you can wander in and out of the elevator and low power consumption, no pollution, not to hurt the ground work, and can be used against the wall and stuck his job, working no dead ends. Single column type the aluminum electric lift coupled with the gantry cross-frame accessories, ideal for theaters, halls, churches, and other maintenance work. The gantry across the frame is easy to assemble and effortless operation, mobile and flexible, fixed seat height of up to 1.1m across obstacles, and stable job on the steps. The rectangular steel production of high strength, rigidity, good stability. With casters, flexibility. Both ends of the frame span adjustable, can be applied across the type of obstacle. Both ends of the frame vertically adjustable, can be used for operations on the slope of a certain slope or steps.

Double masts aluminum lift: new design of a new generation of products, the overall use of high-strength aluminum refined profile, high strength, deflection lifts with minimal swing. Brig pole structure, carrying capacity, platform area, excellent stability, flexible operation, easy to implement. Its light appearance, maximum lifting capacity in a very small space. The lifts are widely used in factories, hotels, buildings, shopping malls, railway stations, airports, stadiums. Can be used as power lines, lighting, appliances, elevated pipeline installation and maintenance, single work of cleaning high-altitude aerial work.

Three masts aluminum lift: three groups of mast support synchronous lifting work platforms, the branched retire structure the same the sloop column platform, large load capacity and excellent stability. Overall lift guardrail device of strength, and greatly reduce machine height in transport, loading and unloading is very convenient through a lift to complete the assembly or disassembly. The lift carrying capacity, suitable for two people (can carry the weight of the tools and materials) climbing operations; non-standard products can also be customized according to the different environment, in order to meet different needs.

Four masts aluminum lift: the overall use of high-strength aluminum refined profile, high strength, a four-masted pole structure, excellent stability, flexible operation, carrying capacity, large platform, and easy to implement. Its light appearance, maximum lifting capacity in a very small space. So that lifts deflection and swing very small. Single work of cleaning high-altitude aerial work.

221   88_1 

wheel chair lift

14. May 2013 · Write a comment · Categories: Uncategorized · Tags: ,

wheel chair lift

This vertical lift is very suitable for disabled person.Our wheelchair lift consists of a platform with high side walls, an upper landing gate, a platform mounted gate, a drive system and easy-to-use operating controls. The platform walls and the platform gate travel with the platform creating a barrier around the passenger. This wheelchair lift can be installed with little to no site modifications. Its hydraulic system offers passengers smooth and comfortable transportation and different safety devices remove every hiding risk.

Manual scissor lift or electric scissor lift

08. May 2013 · Write a comment · Categories: Uncategorized

mobile hydraulic lift

Do I go for a manual scissor lift or an electric scissor lift option?

 

Hello everyone, many customers ask about the manual scissor lift and electric scissor lift, which one is beeter? My suggestion is as follows:

 

This one is simply down to the application; if for example you are using the scissor lift very infrequently and possibly only raising the scissor lift when it is empty then a manual scissor lift may be the best solution for you. If the unit is in frequent use then a electric version would benefit the user. Manual scissor tables are also selected where the ability to power or charge the table is not present and of course manual scissor tables tend to be less expensive than the powered equivalent!

 

Knowledge of the dock ramp run-in period

26. April 2013 · Write a comment · Categories: Uncategorized · Tags:
Knowledge of the dock ramp run-in period
dock-ramp

1, poor lubrication
Due to the new dock ramp assembly parts with a smaller gap, and because assembly and other reasons, it is difficult to guarantee the uniformity with the gap, the lubricant (grease) is not easy to form a uniform film on the friction surface, to prevent wear. Thereby reducing lubrication performance, resulting in abnormal wear of parts early. Can cause severe precision with the friction surface scratches or bite phenomenon, leading to the occurrence of the fault.
2, wear fast
Dock ramp parts processing, assembly and adjustment factors, the friction surface is rough, the small contact area of the mating surfaces, uneven surface pressure conditions. Machine during operation, the parts of the surface of the concave and convex portions are fitted to each other friction, grinding metal debris came down, and as an abrasive, continue to participate in friction, but also speeded up the the part mating surface wear. Thus, the running-in period is likely to cause the wear of the parts (especially the mating surface), the wear speed is fast. At this time, if the dock ramp overload operation, may result in damage to the parts, resulting in early failure.
3. Leakage occurs
Due to the loosening of the parts, the vibration and the impact of the machine is heated, the sealing surface of the machine and pipe fittings, etc., the leakage will occur; portion of defects such as casting, machining, assembly debugging is difficult to find, but because during the operation of the vibration sHOCK, this defect is exposed, the performance of oil leakage (infiltration) (water). Therefore, the run-in period is prone to leakage.
4, loosening
New processing and assembly of parts, there is a deviation of the geometry and mating dimensions, in the initial stage of use, due to the impact, the alternating load such as vibration, as well as heat, deformation and other factors, plus the reason such as excessive wear, easy to make original parts of the fastening loose.
5, operational errors
Understanding of the structure of the machine, performance is not enough (especially the new operator), it is easy to cause a malfunction due to operational errors, and even cause mechanical accident, we have a lot of attention to this knowledge

Diesel scissor lift

19. April 2013 · Write a comment · Categories: Uncategorized · Tags:

Diesel scissor lift

scissor-lift

A client from Ukrainian construction company have demand in hydraulic scissor lift with diesel engine. He needs urgently, and Sinicmech machinery has only 10days left to catch his container.  All our workers work hard, we finished production on time with high quality.
By the way, the lift can lift up with diesel engine, suitable for working outside. As we said, Sinicmech machinery will do our best to service you.

The boom lift bearing cleaning and maintenance work is essential

18. April 2013 · Write a comment · Categories: Uncategorized · Tags:

The boom lift bearing cleaning and maintenance work is essential

boom-lift

Used in industrial boom lifts, boom lift internal contain bearings, we usually use of the boom lifts are very frequent, use a long time, however, the boom lift will be some failures, in fact, the cause of the failure, including the reasons put the expansion of the boom lift inside the bearing wear, cleaning and maintenance work on the boom lift bearing is essential.

Boom lifting platform bearing maintenance steps:

Boom lifts, and allow it to completely stop.

2 boom lift motor bearing lubrication warm. Will relax the existing grease in the bearing chamber of the heat created inside the motor during normal operation, making it easier to work with new grease displacement.

Remove grease relief plug from the motor bearing housing. The relief plug installed in the near the bottom of the housing. It allows excess grease or vent the pressure, at the same time apply the new grease from the bearing housing.

Clean out the grease overflow outlet pipe clean. The old grease becomes dry and hard, the relief port. Break up the hard pipe cleaning grease and open the vent, so that the excess oil or pressure vent path.

Clean, lint-free cloth to wipe the nozzle. Light oil spray can help to break the hardened dirt and grease accumulation of grease nipple. Before cleaning the full application of the grease gun nozzle, will prevent the injected dust and debris from entering the bearing.

 

Regular failure about scissor lift

16. April 2013 · Write a comment · Categories: Uncategorized · Tags:

When using the scissor lift, may you can meet some questions, now let us to tell you how to resolve it,

Reason:

1. Power of electrical machine is abnormal

2. There is no oil or no enough oil in the cylinder

3. Oil filter is blocking

4. Normally closed valve is dirty.

5. Normally closed valve and motor is on power-up state together

6. Gear pump is aged or damaged

7. Hydraulic oil is going aged or bad

8. Emergency bolt becomes less crowded.

How to solve it?

1. Connect the motor power correctly or regulate diversion.

2. Infuse the hydraulic oil.

3. Clean the oil filter or replace the hydraulic oil.

4. Tear down the normally closed valve and wash it with cleaning agent or paraffin.

5. Connect the lines correctly, when motor electrify, the normally closed valve should be interrupt power.

6. Replace the gear pump

7. Change hydraulic oil

8. Screw the emergency bolt.

Companies have chosen to wheelchair lift skills

15. April 2013 · Write a comment · Categories: Uncategorized · Tags:

wheelchair-lift

Companies have chosen to wheelchair lift skills

Enterprises in the purchase of wheelchair lift, first to the enterprise beyond the scope of work frequently, utilization, and other factors into account, choose this working-level units require wheelchair lift.

Under the proposed technical parameters, conduct market research and the selected supply manufacturers, the first condition is the need to see the reputation of the manufacturer, then there are after-sales service capacity. Products of good quality, excellent performance, complete safety devices wheelchair lift in the price reasonable in the circumstances, can be used as the selected object.

How to do the maintenance of scissor lifts in summer

10. April 2013 · Write a comment · Categories: Uncategorized · Tags:

How to do the maintenance of scissor lifts in summer

scissor-lift

Summer how to use scissor lifts? Prepared a few relevant information about it for the majority of new and old customers:

 

First of all, really good lubricant can protect scissor lifts, protection devices play a crucial role, qualified lubricating oil contains a lot of useful equipment anti-wear agents, but there is a little oil recipe pay attention to the well-proportioned to ensure all aspects of the performance is not chaos, add their own words is likely to give the device unnecessarily affect the overall performance decline.

 

Secondly, the use of lubricants to have a degree, under the scale line between the most appropriate, if it is excessive use of lubricating oils is likely flows from the gap between the cylinder and the piston enters the combustion chamber deposit formation.

 

Again, many users will hydraulic oil darkened be replaced, this practice is no basis, if it is not you are plus dispersant lubricants, turn black oil metamorphism. Most of the lubricants used on many automobiles are quiet added decomposing agent can be very effective adhesion in the piston black dispersion in oil coke Clear.

 

Finally, Jinan lifts received a lot of customer information that is not to replace the hydraulic oil, this approach is wrong, if it is often complement and not to replace, only to make up the number on the oil, you can not improve the performance of the lubricant, lubrication oil at work due to various reasons will lead to a decline in quality, but would also produce a certain amount of consumption.

« Older articles